Decoration construction method:
1. Combination method and characteristics
The cleanliness of the clean workshop depends on the sealing performance of the enclosure structure, the combination form of the wall, the process and the form of the selected structural connector (aluminum alloy structure). The scientific and reasonable structure combination provides a strong guarantee for the reliability and stability of the clean workshop.
2. About secondary design
The secondary design of the structure is based on the professional drawings provided by the design institute, combined with the process requirements of the construction party, comprehensive consideration of the professional cooperation of HVAC, pipeline and electrical, the top plate and the wall panel are typeset according to the standard modulus produced by the manufacturer, and the layout of the top plate and the wall panel, doors and Windows, efficient air supply and return air outlet are taken into account from the Angle of beauty. To determine the roof, siding and aluminum profile specifications and quantities.
Through the secondary design, the problems existing in the design can be found in time, and reasonable suggestions can be put forward. If necessary, the reserved channels for some process equipment can be set up, the construction schedule can be adjusted, and the factory can be handed over to the manufacturer for beautiful and qualified workshops according to the specified period.
3. Construction points
The installation of the clean envelope is to install the various main pipes in the technical sandwich, and then thoroughly clean the indoor floor wall and space, and carry out the construction after no dust accumulation, and the parts and sites are cleaned by special personnel during the construction process.






The above content comes from the Internet, if there is infringement contact delete.